ENR
the News
Engineered Systems
PME
Mission Critical

Designing for High Winds

Wood is a proven choice for wind-resistive construction
[ Page 1 of 7 ]         
Sponsored by reThink Wood
Jeffrey B. Stone, Ph.D
 
Continuing Education
 

Learning Objectives - After this course, you should be able to:

  1. Describe the basic parameters for determining wind loads on buildings in accordance with the 2015 IBC and ASCE 7-10.
  2. Consider the effects of topography, wind directionality and openings in the structure on calculated wind loads and wind pressures.
  3. Explain how the exposure category for a building project can vary based on the roughness of nearby terrain.
  4. Recognize the importance of a continuous load path in minimizing damage to wood buildings in a high wind event.

Credits:

1 AIA LU/HSW
1 GBCI CE Hour
1 PDH
0.1 IACET CEU
*This course may qualify for PDH credit. Check your state licensing board for all laws, rules and regulations to confirm.

Most regions of the United States face high wind hazards with the accompanying threat of wind-related damage to buildings. According to the Insurance Institute for Business and Home Safety (IBHS), high winds cause millions, if not billions, of dollars of damage each year.1 However, much of this damage could be avoided with a few affordable techniques designed to strengthen buildings against wind forces—techniques that account for interactions between wind loads and building material properties.

All buildings are at risk of experiencing damage during high winds. Each structure, with its own unique set of characteristics, such as stiffness, strength and shape, reacts differently to wind loads. However, wood is conducive to meeting the challenges of wind-resistive design. For example, one of wood's characteristics is that it can carry substantially greater maximum loads for short durations than for long periods of time,2 as is the case during high wind events. Wood buildings also tend to be comprised of repetitive framing attached with numerous fasteners and connectors, which provide multiple and often redundant load paths for resistance to wind forces. Further, when structural panels such as plywood or oriented strand board (OSB) are properly attached to lumber floor, roof and wall framing, they form diaphragms and shear walls that are exceptional at resisting high winds. In addition to their other advantages—such as cost-effectiveness and sustainability—properly designed and constructed wood structures complying with building code requirements have proven to perform well during high wind events.

For example, according to a report on building performance during the 2004 hurricane season by the Federal Emergency Management Agency (FEMA), new wood-frame houses built in accordance with the building code performed well structurally, including those located in areas that experienced winds of up to 150 mph (3-second gust). For these buildings, load path was accounted for throughout the structure, including the connection of the roof deck to supporting trusses and rafters. Because of this, loss of roof decking on newer homes was rare.3

This continuing education course provides an overview of wind-resistive design issues in wood buildings with a focus on compliance with the 2015 International Building Code (IBC) and American Society of Civil Engineers/Structural Engineering Institute (ASCE/SEI) Minimum Design Loads for Buildings and Other Structures (ASCE 7-10). The information on code-conforming wood design contained in this course is based on the American Wood Council's (AWC's) 2015 National Design Specification® (NDS®) for Wood Construction, the 2015 Special Design Provisions for Wind and Seismic (SDPWS) and the 2015 Wood Frame Construction Manual (WFCM).

Wood is a proven choice for wind-resistive construction

 

[ Page 1 of 7 ]         
Reprinted from the Engineering News-Record

Notice